Low-Loss 240 Braided N-Type Male to SMA Male Right Angle 10FT
10 ft Low-Loss 240 jumper, N-Male to SMA-Male right-angle. 50 ohm, 600-3000 MHz, VSWR 1.32 max.
Details
The 123-14NMSMAMR-05 is a 10-foot RF coax jumper assembly built on Low-Loss 240 cable. One end terminates in a straight N-Type male; the opposite end uses an SMA male right-angle for tight clearance and panel-edge routing. Both connectors are solder-attached, assembled to IPC/WHMA-A-620 Class 2 workmanship.
Electrical performance covers 600 to 3000 MHz with maximum VSWR of 1.32 and return loss of 17 dB or better. PIM is rated at -110 dBc or better at the SMA right-angle interface, suitable for distributed antenna and small-cell jumper service. The 50 ohm characteristic impedance matches standard N and SMA system interfaces.
Low-Loss 240 is the workhorse flexible coax in this gauge class - braided shielding, foam PE dielectric, and a flexible PE jacket. The 0.240 in OD profile threads through tight conduit and panel cutouts where rigid hardline cannot.
Why this part
Built for installations that need an N-Type connection on one end and an SMA right-angle on the other. Five feet of Low-Loss 240 cable gives you the flexibility to route through panels and cabinets while holding 1.32 VSWR and 17 dB return loss across 600 to 3000 MHz. Solder-attached connectors and IPC/WHMA-A-620 Class 2 workmanship eliminate the variability of field-crimped joints - the assembly arrives terminated and ready to install.